大流量软管泵40立方沅陵火电核电厂酸碱液

单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。

Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .

 

多用途移动泵站的主要用途：
多用途移动泵站基于泵设计开发，大流量软管泵是市政给排水中常用的一种泵型，拥有大量的潜在用户，其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。

The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.

BW软管泵的基本结构<br />

往复泵由动力段和液力端两大部分组成。<br />
动力端的功能，是将动力机的回转运动转变为活塞(或柱塞)的直线往复运动。它包括传动离合装置、变速减速装置和曲柄连杆。它们的相互位置与安排决定着泵的总体结构型式，决定着泵的驱动方案及结构方案的选择。动力端的主要零部件包括皮带轮，离合器曲轴箱体及其中的传动轴，齿轮副，曲轴，连杆及十字头滑块。<br />！